The Goodridge Clutch Line
If you are replacing your clutch this is a perfect time to install this upgrade.
Features a PTFE inner hose covered by a stainless steel braided shell for long lasting durability. Goodridge braided stainless steel clutch lines will increase clutch feel and prevents a spongy clutch pedal. These lines are DOT approved for use on public roads and include all hardware for installation.
GrimmSpeed Turbo Heat Shield
We knew when it came time to design this product we didn’t want to just create another heat shield to add to the mix, but create another level of product. The basic heat shield would not cut it, we wanted every fitment of turbo, downpipe, and up pipe combination we could work into one design. We measured, cut, bent, welded, riveted, and after many tested prototypes we arrived at a heatshield we are extremely proud of. Other heatshields had problems with cracking, poor fitment, or poor heat coverage but we would not settle for this! So here it is, elegantly simple in style, but painstakingly engineered in design. It’s what you can expect from GrimmSpeed™ Please note that this will only work LHD vehicles.
* Enhanced Turbo/Downpipe Coverage (Keeps radiant heat out of engine bay)
* Fits all Factory and Most Aftermarket Turbos on LHD cars only (Designed to work with your future upgrades!)
* Durable 304 Stainless Steel Construction
* Intercooler Stays MUCH Cooler (Turbo is very close to IC)
* Fits Most Downpipes (Even the HUGE 4″ TurboXS!)
* Only Heat Shield that works with External Wastegate Up Pipes
* Won’t Overheat Your Turbo like a Turbo Blanket
SPC Alignment Components – Control Arm(’08+ STi, WRX, BRZ)
*ADJUSTABLE CONTROL ARMS*
These fully adjustable Upper Control Arms transform your classic Mopar from sluggish, non-responsive handling to high performance FUN! Dial in additional positive caster, adjust your camber, and enjoy the feel of up to 6 degrees adjustment! Arms include stock ball joints. Sold as individual arms. Ball joint are often included (check Item Notes for specifis).
*TUBULAR CONTROL ARMS*
These arms lower your front end by 1″ and add 1° positive caster for an aggressive, ready-to-run stance. Optional Ride Height Tuning Kits are available for use with our Pro Series Springs or ‘standard type’ springs to raise the ride height if desired. If you have coilovers use our Coilover Mount and Spacer Plate.
For specific vehicles this tubular style arm is great when lowering this popular vehicle, or for correcting rear camber on stock vehicles.
These extreme lower control arms are for Performance Vehicles. Made from aircraft aluminum alloy, these arms are available in a silver, blur or red finish. When teamed up with front and rear camber arms SPC Performance provides you with a complete alignment solution when lowering your car.
*LOWER CONTROL ARM*
These arms fit for your ride, giving you a range of camber change. Great for popular tuner vehicles, these machined parts are in a stand-out silver anodized finished with SPC “Red” nuts.