Enkei RPF1: 4X100 /15X8 +28

3531_0

Enkei has released the 15″ RPF1 lightweight racing wheel with 4X100 bolt pattern, 8″ width, and a +28 offset, which is now in stock at Turn 14 Distribution. This wheel is perfect for 4 lug vehicles looking for a lightweight wheel with aggressive offset. As with all aftermarket wheels, proper measuring should be done to ensure fitment.

RPF1 Details: 4X100 /15X8 / +28 Offset

Weight:11.64 Lbs Each

Mat Process: Shaping by the MAT process reduces wheel weight by 10%-15%. Every pound of unsprung weight savings has the effect of reducing overall vehicle weight by 20lbs.

F1 Replica: Enkei is an official supplier of the McLaren Mercedes Formula One Team. The RPF1 was developed using the same technology as the Formula One race wheel. TWIN SPOKES: Enkei’s dual open stance spoke design is used on the McLaren Mercedes Formula One race wheel. The twin spokes achieve better stress dispersion on curves, hard braking, and extreme race driving.

Center Design: Enkei’s pocket design around the bolt circles increases rigidity and keeps the wheel cooler during aggressive race driving.

KW Coilovers: 2015 BMW M3/M4

 

3527_0

KW Suspensions has released their Clubsport and Variant 3 (V3) Coilovers for the 2015 BMW M3 (F80) & M4 (F82). Also involved with this release is their cancellation kit and Height Adjustable Spring (H.A.S) kit.

Clubsport Coilovers

The Clubsport Coilovers are available in both 2-way and 3-way dampening adjustability. They also come with racing style top mounts with camber adjustment.

Front Lowering: 15-40mm
Rear lowering : 20-45mm
Front Spring Rate : 575 lbs/inch
Rear Spring Rate : 800 lbs/inch

Variant 3 Coilovers

KW’s very popular Variant 3 (independent rebound and compression adjustable) coilover is offered for both vehicles with and without the factory Adaptive M Suspension feature.

Front Lowering: 20-45mm
Rear lowering : 25-50mm
Front Spring Rate : Progressive
Rear Spring Rate : 685 lbs/inch

Height Adjustable Spring (H.A.S)

KW has also produced a Height Adjustable Spring Kit for the new M3/M4. This is a spring and sleeve setup which utilizes your factory struts and shocks.

Front Lowering: 10-30mm
Rear lowering : 5-25mm

Share This